Loading...
Notera att bild inte alltid stämmer överens med build-kit. Se beskrivning och specifikationer för fullständig information.
HUNT Proven Carbon Trail H_Core MTB Mullet Wheelset
HUNT Proven Carbon Trail H_Core MTB Mullet är byggd för att leverera topprestationer på stigarna. Dessa lätta och hållbara kolfiberhjul är perfekta för både långa äventyr och snabba turer på lunchen.
Med H_Core-impactskydd, fram- och bakhjulsspecifika kolfiberfälgar och förstärkta bakfälgar (4mm bead) minskas risken för punktering och ökar hållbarheten. Hjulsetet är handbyggt med precision och kombinerar vårt supersnabba S_RapidEngage 90t-nav med tripple-butted ekrar, vilket ger ett systemvikt på endast 1732 g.
Det är optimerat för däck mellan 2,4" och 2,6", men fungerar även bra med däck mellan 2,25" och 2,8". HUNT Proven Carbon Trail H_Core MTB Mullet är redo att ta dig an alla utmaningar på stigarna med prestanda och pålitlighet.
Välj din
Full specs
- Rims Hookless, Front 31mm Rear 30mm internal rim width, 38mm external and 22mm depth. 4mm rear rim side wall/bead width for added pinch flat puncture resistance. Asymmetric profile reduces spoke tension differential for improved long term wheel build durability. H_Core internal carbon insert, designed to increase fibre density and boost strength for demanding trail use. Tubeless-ready – designed to work perfectly with either tubless tyres or with inner tubes. Tubeless-rim tape and valves included. HUNT Anti-Splinter layup boosts resistance to micro cracks. H-lock bead-seat up-kicks for easy and secure tubeless installation. UD rim finish with either: Bright White Graphic- Water transfer under lacquer. Stealth Black Graphic – Water transfer under lacquer.
- Spokes 28 Spoke count in a 2x lacing pattern. Straight-pull for excellent torsional strength and direct power transfer. Pillar spokes made from Sandvik T302 (18/10) stainless steel. Triple butted 2.0-1.6-2.0 front (then 2.2 at the head for the patented Pillar Spoke Re-inforcement). Lower gauge spoke provides handling and tracking qualities needed for the front wheel. Triple butted 2.0-1.7-2.0 rear (then 2.2 at the head for the patented Pillar Spoke Re-enforcement) Higher gauge spoke adds impact strength for the rear wheel. Patented Pillar Spoke Re-enforcement, butted again just before the spoke head providing more durability in high stress area.
- Nipples Alloy square body for external adjustment and square head for easy internal adjustment/tensioning. 16mm length with washer for a strong connection to the spoke added durability. 14 gauge. Black hard-anodized finish.
- Bearings Sealed cartridge replaceable units. Dual full-contact seals for increased durability.
- Rear Hub CNC machined 6061-T6 heat-treated aluminium alloy hub body. 148x12mm Boost design. H_CERAMIK freehub body reinforcement coating (Shimano/Sram HG body) provides excellent durability and protects against cassette sprocket damage to the freehub often seen on standard alloy freehub bodies. Hunt S_Rapid 2-degree engagement. Oversized 7075-T6 heat-treated aluminium axles. Centre-lock disc mount. All freehub standards accounted for. Black anodised finish with laser graphics.
- Front Hub Forged and CNC’d 6061-T6 heat treated aluminium alloy body. 110x15mm spacing. 7075-T6 aluminium alloy axles. Centre-lock disc mount. Black anodised finish with laser graphics.
- Axle Sizes Boost - 148x12mm (Rear) with 110x15mm (Front). SRAM/Shimano 8/9/10/11 speed, Shimano Microspline and SRAM XD compatible.
- Tyres Info HUNT recommends a 2.3"-2.6" tyre for best performance, tyre widths between 1.9" and 2.8" are also safe to use. Tubeless-ready for lower weight and rolling resistance. You must not exceed the maximum tyre pressure limits set out in the table below or the maximum limit set by your tyre manufacturer if this is lower.
OBS! Notera att bild inte alltid stämmer överens med build-kit. Se beskrivning och specifikationer för fullständig information.
